Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: Article
Number of items at this level: 97.

Article

Bagchi, S. (1978) Indian Mining Industry - Contributions of research. Journal of Mines, Metals & Fuels, 26 (1). pp. 9-12. ISSN 0022-2755

Buragohain, J. and Kumar, Rakesh and Singh, Rajendra (2001) A Mining Method for underground Extraction of thick and steep coal seams of NEC, Assam. Indian Mining & Engineering Journal , 40 (4). pp. 31-40. ISSN 0019-5944

Chugh, J.C. (1983) Gassiness of coal seams-criteria for categorisation. Journal of Mines, Metals & Fuels, 31 (2). pp. 41-47. ISSN 0022-2755

Chugh, J.C. (1979) Pilot scheme of degassification of coal seams at amlabad colliery. Journal of Mines, Metals & Fuels, 27 (10&11). pp. 381-397. ISSN 0022-2755

Das, A.J. and Mandal, Prabhat Kumar and Ghosh, C.N. and Sinha, A. (2014) An Attempt to Develop A Technology for Extraction of Locked up Coal From Underground Mines Using Artificial Pillars. Indian Mining & Engineering Journal , 53 (5). pp. 18-25. ISSN 0019-5944

Das, Arka Jyoti (2018) Assessment of occupational health exposure to particulate matter around opencast coal mines, India: a case study. Arabian Journal of Geosciences, 11 (14). p. 373. ISSN 1866-7511

Das, Arka Jyoti (2018) Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects, India: a case study. Arabian Journal of Geosciences, 11 (10). p. 241. ISSN 1866-7511

Das, Arka Jyoti and Mandal, Prabhat Kumar (2019) Generalised Analytical Models for the Strength of the Inclined as well as the Flat Coal Pillars using Rock Mass Failure Criterion. Rock Mechanics and Rock Engineering , 52 (10). pp. 3921-3946. ISSN 0723-2632

Das, Arka Jyoti and Mandal, Prabhat Kumar (2018) Strategies for underground Extraction of the inclined coal seams by continuous miner. Mining, Geological and Metallurgical Institute , 114. pp. 2-12.

Das, Arka Jyoti and Mandal, Prabhat Kumar and Kumar, Ranjan and Tewari, Subhashish (2021) Investigation of Failure Mechanism of Inclined Coal Pillars: Numerical Modelling and Tensorial Statistical Analysis with Field Validations. Rock Mechanics and Rock Engineering . ISSN 0723-2632

Das, Arka Jyoti and Mandal, Prabhat Kumar and Kumbhakar, D. and Mishra, P.K. (2014) Effects of RIB Pillars at Higher Depth of Working: A Numerical Modeling Based Study. Mining Engineers' Journal , 16 (2). pp. 23-30.

Das, Arka Jyoti and Mandal, Prabhat Kumar and Kushwaha, Angad (2018) Evaluation of the Effect of Fault on the Stability of Underground Workings of Coal Mine through DEM and Statistical Analysis. Journal of the Geological Society of India , 92 (6). pp. 732-742. ISSN 0016-7622

Das, Arka Jyoti and Mandal, Prabhat Kumar and Prakash, Amar and Roy, Lal Babu and Tewari, Subhashish (2020) Underground extraction methodology of contiguous coal seams ensuring the safety of the parting and the surface structures. Safety Science, 121. pp. 215-230. ISSN 0925-7535

Das, Arka Jyoti and Mandal, Prabhat Kumar and Tewari, Subhashosh (2019) Assessment of the Strength of Inclined Coal Pillars through Numerical Modelling based on the Ubiquitous Joint Model. Rock Mechanics and Rock Engineering , 52 (10). pp. 3691-3717. ISSN 0723-2632

Das, T.K. and Singh, T.N. (1995) Hydraulic Mining at Gopalichak Colliery of Jharia Coalfield. Journal of Mines, Metals & Fuels, 43 (1&2). pp. 7-16. ISSN 0022-2755

Dhar, B.B. and Singh, T.N. (1994) Thick seam Mining - Problems and Issues. Journal of Mining Research , 2 (3&4). pp. 1-6. ISSN 0971-1899

Dube, A.K. and Singh, B. (1972) Effect of humidity on Tensile Strength of Sandstone. Journal of Mines, Metals & Fuels, 20 (1). pp. 8-10. ISSN 0022-2755

Kumar, Ashok and Kumar, Rakesh and Singh, Arun Kumar and Ram, Sahendra and Singh, P.K. and Singh, Rajendra (2017) Numerical modelling-based pillar strength estimation for an increased height of extraction. Arabian Journal of Geosciences, 10 (18). p. 411. ISSN 1866-7511

Kumar, Ashok and Singh, Arun Kumar and Ram, Sahendra and Kumar, Rakesh and Singh, Rajendra and Singh, Amit Kumar (2019) Roof sagging limit in an early warning system for safe coal pillar extraction. International Journal of Rock Mechanics and Mining Sciences , 123. ISSN 1365-1609

Kumar, Ashok and Singh, Arun Kumar and Ram, Sahendra and Singh, Rakesh (2018) Influence of Overlying Roof Strata on Rib Design in Mechanised Depillaring. Journal of the Geological Society of India , 91 (3). pp. 341-347. ISSN 0016-7622

Kumar, Ashok and Singh, Rajendra and Ram, Sahendra (2019) Performance of a coal Pillar at deeper cover: Field and simulation studies. International Journal of Rock Mechanics and Mining Sciences , 113. pp. 322-332. ISSN 1365-1609

Kumar, Ashok and Singh, Arun Kumar and Kumar, Dheeraj and Ram, Sahendra and Kumar, Rakesh and Singh, Amit Kumar and Singh, Rajendra (2019) Caveability Assessment of a Hanging Overlying Massive Deccan Trap and its Effect on Underground. Insights in Mining Science and Technology, 1 (3). pp. 1-11.

Kumar, Rakesh and Mishra , A.K. and Singh, Amit Kumar and Singh, Arun Kumar and Singh , Rajendra (2015) Cable Bolting Based depillaring of a Thick Coal Seam in Single Lift : A case Study. MGMI Transactions , 111.

Kumar, Rakesh and Singh, Arun Kumar and Mandal, Prabhat Kumar and Singh, Rajendra (2007) Stability of Pillars during underground extraction of thick coal seam in single lift – case studies. Minetech, 28 (1). pp. 3-10. ISSN 0970-7204

Kumar, Rakesh and Singh, Arun Kumar and Singh, Amit Kumar and Ram, Sahendra and Singh, Rajendra (2016) Depillaring of total thickness of a thick coal seam in single lift using cable bolts: A case study. International Journal of Mining Science and Technology, 26 (2). pp. 223-233. ISSN 2095-2686

Kumar, Rakesh and Singh, Arun Kumar and Singh, Rajendra (2015) Underground mining of thick coal seams. International Journal of Mining Science and Technology, 25 (6). pp. 885-896. ISSN 2095-2686

Mandal, Prabhat Kumar (2019) Evaluation of bump-proneness of underground coal mines using burst energy coefficient. Arabian Journal of Geosciences. ISSN 1866-7511

Mandal, Prabhat Kumar and Das, Arka Jyoti and Bhattacharjee, Rana and Tewari, Subhashish and Kushwaha, Angad (2018) Assessment of roof convergence during driving roadways in underground coal mines by continuous miner. International Journal of Rock Mechanics and Mining Sciences , 108. pp. 169-178. ISSN 1365-1609

Mandal, Prabhat Kumar and Das , Arka Jyoti (2018) Prediction of coal bump with respect to local mine stiffness and post-failure stiffness using numerical modelling. Journal of Mines Metals & Fuels, 66 (6). pp. 328-338. ISSN 0022-2755

Mandal, Prabhat Kumar and Singh, Aurn Kumar and Singh, Rakesh Kumar and Singh, Rajendra (2006) Instrumentation and Monitoring Strategies for study of Ground Movement During Underground Extraction of coal. Mining Engineers' Journal , 8 (5). pp. 15-27.

Mandal, Prabhat Kumar (2007) Numerical Modeling-based study in bord and pillar working - a Prerequisite for support design in mines. Minetech, 28 (1). pp. 19-28. ISSN 0970-7204

Mandal, Prabhat Kumar and Dubey, B.K. (1999) Importance of Convergence/Closure Measurements during Extraction of Coal in Underground Mines. Coal Mining Technology & Management , 4 (3). pp. 209-8.

Mandal, Prabhat Kumar and Maity, R. (2000) Microprocessor based real time monitoring for strata behaviour investigations in underground mines. Minetech, 21 (2). pp. 3-6. ISSN 0970-7204

Mandal, Prabhat Kumar and Singh, Arun Kumar and Buragohain, J. and Singh, Rajendra (2002) A novel method of mining for underground winning of contiguous sections of a coal seam under fragile parting. Journal of Mines, Metals & Fuels, 50 (1&2). pp. 25-33. ISSN 0022-2755

Mandal, Prabhat Kumar and Singh, Arun Kumar and Ram, Sahendra and Singh, Amit Kumar and Singh, Rajendra (2004) Depillaring of a thick coal seam using cable bolts under shallow depth cover - a case study. Indian Mining & Engineering Journal , 43 (7). pp. 11-18. ISSN 0019-5944

Mandal, Prabhat Kumar and Singh, Arun Kumar and Ram, Sahendra and Singh, Amit Kumar and Singh, Rajendra (2004) Strata behaviour investigations of India's first depillaring face with continuous miner and shuttle car. Minetech, 25 (6). pp. 3-12. ISSN 0970-7204

Mandal, Prabhat Kumar and Singh, Rajendra (2006) Impact of Stress Redistribution on Stability of workings during Depillaring. Journal of Institution of Engineers (India) MN, 87. pp. 10-22.

Mandal, Prabhat Kumar and Singh, Rajendra and Singh, Arun Kumar and Kumar, Rakesh and Sinha, A. (2006) State-of-art vis-a-vis Indian scenario of application of continuous miner based mass production technology. Journal of Mines, Metals & Fuels, 54 (12). pp. 332-336. ISSN 0022-2755

Mandal, Prabhat Kumar and Singh, Rajendra and Singh, Arun Kumar and Kumar, Rakesh and Sinha, A. (2008) Underpinning-based simultaneous extraction of contiguous sections of a thick coal seam under weak and laminated parting. International Journal of Rock Mechanics and Mining Sciences , 45 (1). pp. 11-28. ISSN 1365-1609

Mandal, Prabhat Kumar and Singh, T.N. (1999) A New Method for Depillaring of Thick Seam. Coal Mining Technology & Management , 4 (6). pp. 12-24.

Mandal, Prabhat Kumar and Singh, T.N. (1998) Role of Instrumentation and Instruments to Study the Strata Behaviour During Depillaring Operation. Indian Mining & Engineering Journal , 37 (12). pp. 31-38. ISSN 0019-5944

Mukerjee, R.N. and Krishnan, N.G. and Banerjee, A. and Adhikari, J.P. and Singh, B. (1982) A Review of the Permissible dust limit for Indian coal Mines and an appraisal of the present situation. Journal of Mines, Metals & Fuels, 30 (2). pp. 68-70. ISSN 0022-2755

Pandey, P. and Singh, B. (1965) Recent Trends in the Methods of Underground Firedamp Detection. Journal of Mines, Metals & Fuels, 13 (9). pp. 269-278. ISSN 0022-2755

Prasad, Mohan (2001) Dirgha Visphoton Vidhi ke Ayamo ka Tathyablokon Avam Uska Safal Proyog. Minetech, 22 (3). pp. 52-56. ISSN 0970-7204

Ram, Sahendra and Singh, Arun Kumar and Kumar, Ashok and Singh, Rajendra (2017) Field and numerical modelling studies for an efficient placement of roof bolts as breaker line support. International Journal of Rock Mechanics and Mining Sciences , 93. pp. 152-162. ISSN 1365-1609

Singh, Arun Kumar (2005) Study of Mining Induced Stress During Extraction of Coal Pillar. Minetech, 26 (3). pp. 10-16. ISSN 0970-7204

Singh, Arun Kumar and Ram, Sahendra and Singh, Rajendra and Kumar, Ashok (2016) Rib/snook competency in mechanised depillaring of the conventionally developed coal seams. Journal of Mines, Metals & Fuels, 64 (9). pp. 414-423. ISSN 0022-2755

Singh, Arun Kumar and Singh, Rajendra and Kumar, Rakesh and Mandal, Prabhat Kumar (2011) Assessment of mining induced stress development over coal pillars during depillaring. International Journal of Rock Mechanics and Mining Sciences , 48 (5). pp. 805-818. ISSN 1365-1609

Singh, Arun Kumar and Singh, Rajendra and Mandal, Prabhat Kumar (2002) Inclined Slicing of a Thick Coal Seam in Ascending order - a Case study. CIM Bulletin, 95 (1059). pp. 124-128. ISSN 0317-0926

Singh, Arun Kumar and Singh, Rajendra and Mandal, Prabhat Kumar and Kumar, Rakesh and Singh, Amit Kumar and Ram, Sahendra (2009) Rock Mechanics challenges of depillaring at deep cover. Journal of Mines, Metals & Fuels, 57 (9). pp. 298-306. ISSN 0022-2755

Singh, B. (1985) Mining Research in India. Journal of Mines, Metals & Fuels, 33 (6&7). pp. 320-342. ISSN 0022-2755

Singh, Rajendra (2013) Long-hole destress blasting for rockburst control during deep underground coal mining. International Journal of Rock Mechanics and Mining Sciences , 61. pp. 141-153. ISSN 1365-1609

Singh, Rajendra and Singh, Arun Kumar and Ram, Sahendra (2016) Rib/snook design in mechanised depillaring of rectangular/square pillars. International Journal of Rock Mechanics and Mining Sciences , 84. pp. 119-129. ISSN 1365-1609

Singh, Rajendra (1997) Digital Photogrammetry for Automatic Close Range Measurement of Textureless and Featureless Objects. Photogrammetric Record, 15 (89). pp. 691-702. ISSN 1477-9730

Singh, Rajendra (1996) Laser Dot Matrix based digital system for for monitoring Textureless Roof Strata of Mines. International Archives of Photogrammetry and Remote Sensing, 35 (5). pp. 540-545. ISSN 0256-1840

Singh, Rajendra (1997) Machine Vision for Dimensional Measurements in Mines. Geotechnical and Geological Engineering , 15 (3). pp. 185-203. ISSN 0960-3182

Singh, Rajendra (1999) Mining Methods to overcome geotechnical problems during underground working of thick coal seams - case studies. transactions of the Institution of Mining & Metallurgy Sec. A, Mining Industry , 108 (2). pp. 121-131. ISSN 0371-7844

Singh, Rajendra (2004) Staggered development of a thick coal seam for full height working in a single lift by the blasting gallery method. International Journal of Rock Mechanics and Mining Sciences , 41 (5). pp. 745-759. ISSN 1365-1609

Singh, Rajendra and Kushwaha, A. and Singh, T.N. (1993) Geotechnical Evaluation of a Mechanised Longwall - Soutirage Face. Minetech, 14 (5&6). pp. 42-45. ISSN 0970-7204 (In Press)

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2000) Cable bolt based mechanised depillaring of a thick coal seam. Minetech, 21 (3&4). pp. 3-9. ISSN 0970-7204

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2001) Cable-bolting-based semi-mechanised depillaring of a thick coal seam. International Journal of Rock Mechanics and Mining Sciences , 38 (2). pp. 245-257. ISSN 1365-1609

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2002) Geo-technical considerations for long-term stability of developed coal seams below important surface features. Minetech, 23 (6). pp. 15-25. ISSN 0970-7204

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2004) Partial Underground Extraction of coal at shallow cover. Indian Mining & Engineering Journal , 43 (2-3). pp. 29-44. ISSN 0019-5944

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2000) Wide stall Mining : A method to optimise coal recovery from a seam under surface features. Minetech, 21 (3&4). pp. 10-17. ISSN 0970-7204

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar and Kumar, Rakesh and Ghosh, A.K. (2008) Upshot of strata movement during underground mining of a thick coal seam below hilly terrain. International Journal of Rock Mechanics and Mining Sciences , 45 (1). pp. 29-46. ISSN 1365-1609

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar and Kumar, Rakesh and Ram, Sahendra (2005) Encountering induced horizontal stress during simultaneous depillaring of thick and contiguous section below hilly terrain : a case study. MGMI Transactions, 102 (1&2). pp. 37-61. ISSN 0371-9538

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar and Kumar, Rakesh and Ram, Sahendra and Singh, Amit Kumar (2007) Interaction of ground movement with underground mining of thick and contiguous sections below hilly terrain: a case study. Minetech, 28 (2-3). pp. 33-44. ISSN 0970-7204

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar and Kumar, Rakesh and Sinha, A. (2011) Coal pillar extraction at deep cover: With special reference to Indian Coalfields. International Journal of Coal Geology , 86 (2-3). pp. 276-288. ISSN 0166-5162

Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar and Kumar, Rakesh and Sinha, A. (2007) Optimal Underground Extraction of Coal at Shallow Cover Beneath Surface/Subsurface Objects: Indian Practices. Rock Mechanics and Rock Engineering , 41 (3). pp. 421-444. ISSN 0723-2632

Singh, Rajendra and Ram, Sahendra and Singh, Amit Kumar and Buragohain, J. (2004) Underground extraction of contiguous coal seams/sections consisting thin parting: a case study. Journal of the South African Institute of Mining and Metallurgy , 104 (1). pp. 17-28. ISSN 0038-223X

Singh, Rajendra and Singh, Arun Kumar and Mandal, Prabhat Kumar (2002) Cuttability of coal seams with igneous intrusions. Engineering Geology, 67. pp. 127-137. ISSN 0013-7952

Singh, Rajendra and Singh, Arun Kumar and Mandal, Prabhat Kumar and Kumar, Rakesh (2011) An observational approach for assessment of dynamic loading during underground coal pillar extraction. International Journal of Rock Mechanics and Mining Sciences , 48 (5). pp. 794-804. ISSN 1365-1609

Singh, Rajendra and Singh, Arun Kumar and Mandal, Prabhat Kumar and Kumar, Rakesh and Buragohain, J. (2002) A Novel Method for Underground Extraction of a Critically Thick Coal Seam Standing on Pillars and the Development made along the Roof Horizon. Minetech, 23 (1&2). pp. 3-11. ISSN 0970-7204

Singh, Rajendra and Singh, Arun Kumar and Mandal, Prabhat Kumar and Sinha, A. (2004) Instrumentation and monitoring of strata movement during underground mining of coal. Minetech, 25 (5). pp. 12-26. ISSN 0970-7204

Singh, Rajendra and Singh, Manoj Kumar and Ram, Sahendra and Singh, Amit Kumar (2005) Automation and Automatic Measurement for Mining : CCD-Based Approach. Minetech, 26 (6). pp. 37-45. ISSN 0970-7204

Singh, Rajendra and Singh, T.N. (1999) Investigation into the behaviour of a support system and roof strata during sublevel caving of a thick coal seam. Geotechnical and Geological Engineering , 17 (1). pp. 21-35. ISSN 0960-3182

Singh, Rajendra and Singh, T.N. (1988) Motion-Parallax for strata Deformation Around mining excavation. Indian Mining & Engineering Journal , 27 (8). pp. 5-9. ISSN 0019-5944

Singh, Rajendra and Singh, T.N. (1986) Photogrammetry for mining studies. Journal of Mines, Metals & Fuels, 34 (5&6). pp. 280-289. ISSN 0022-2755

Singh, Rajendra and Singh, T.N. (1988) Terrestrial Photogrammetry for open pit monitoring. Indian Mining & Engineering Journal , 27 (5). pp. 11-22. ISSN 0019-5944

Singh, Rajendra and Singh, T.N. (1999) Wide stall mining for optimal recovery of coal from a thick seam under surface features. International Journal of Rock Mechanics and Mining Sciences , 36 (2). pp. 155-168. ISSN 1365-1609

Singh, Rajendra and Singh, T.N. and Dhar, B.B. (1996) Coal Pillar Loading in Shallow Mining Conditions. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 33 (8). pp. 757-768. ISSN 0148-9062

Singh, S.D. (1989) System reliability modeling and evaluation. Journal of Mines, Metals & Fuels, 37 (3). pp. 117-122. ISSN 0022-2755

Singh, T.N. (1991) An Apprasial of Thick Coal Seam Minnig Methods for India. Indian Mining & Engineering Journal , 30 (4-5). pp. 9-17. ISSN 0019-5944

Singh, T.N. (1993) Coal mining Horizons of the united States. Minetech, 14 (3). pp. 30-39. ISSN 0970-7204

Singh, T.N. (1994) Finite Element Analysis of Yield Pillars in Thick Seam Mine Using concrete model. Journal of Mining Research , 2 (3&4). pp. 51-57. ISSN 0971-1899

Singh, T.N. (1998) Needs profile of innovative equipment for bord and pillar workings. Journal of Mines, Metals & Fuels, 46 (8&9). pp. 247-252. ISSN 0022-2755

Singh, T.N. (1997) Safety in Surface mining of Coal. Indian Mining & Engineering Journal , 36 (11). pp. 19-24. ISSN 0019-5944

Singh, T.N. (1989) Shear strength Characteristics of sandstones of an opencast mining block Jharia Coalfield, India. Journal of Mines Metals & Fuels, 37 (1). pp. 14-20. ISSN 0022-2755

Singh, T.N. (1990) Status of R & D in underground coal mining methods and techniques. Journal of Mines, Metals & Fuels, 38 (12). pp. 355-371. ISSN 0022-2755

Singh, T.N. and Dubey, B.K. and Mandal, Prabhat Kumar (1999) A method for depillaring of thick seams standing on pillars with cable bolt support. Journal of Scientific & Industrial Research , 58 (6). pp. 422-430. ISSN 0022-4456

Singh, T.N. and Gupta, R.N. and Verma, B.P. and Singh, B. (1986) Cable bolted slicing of thick seam standing on pillars. Journal of Mines, Metals & Fuels, 34 (7). pp. 350-358. ISSN 0022-2755

Singh, T.N. and Singh, B. (1967) Fundamentals of Mine Modelling. Journal of Mines, Metals & Fuels, 15 (8). pp. 245-249. ISSN 0022-2755

Singh, T.N. and Singh, B. (1971) Load and Convergence Measurements in Worked-out Areas in Mines - A Critical Review. Journal of Mines, Metals & Fuels, 19 (1). pp. 7-21. ISSN 0022-2755

Singh, T.N. and Singh, B. (1977) Model studies of strata movement around a longwall face. Journal of Mines, Metals & Fuels, 25 (2). pp. 39-43. ISSN 0022-2755

Singh, T.N. and Singh, B. (1982) Selection Criteria of Powered supports in Indian Mines. Journal of Mines, Metals & Fuels, 30 (10). pp. 477-482. ISSN 0022-2755

Singh, T.N. and Singh, B. (1972) Strata movement around workings in a massive formation - an equivalent material model investigation. Journal of Mines, Metals & Fuels, 20 (9). pp. 267-274. ISSN 0022-2755

Singh, T.N. and Singh, R. P. and Dubey, B.K. and Singh, B. (1989) Floor bearing study for support planning. Journal of Mines, Metals & Fuels, 37 (11). pp. 513-519. ISSN 0022-2755

This list was generated on Thu Mar 28 21:42:11 2024 IST.