Number of items: 43. BBagde, M.N. (2000) Mining Engineering Curricula for 21st Century. Indian Mining & Engineering Journal , 39 (9). pp. 32-36. ISSN 0019-5944 Bagde, M.N. (2000) An investigation into strength and porous properties of metamorphic rocks in the Himalayas: A case study. Geotechnical and Geological Engineering , 18 (4). pp. 209-219. ISSN 0960-3182 Bhowmick, B.C. and Sahay, N. and Ahmad, I. and Verma, S.M. (2000) Significant improvement in effectiveness of nitrogen infusion technology for control of fire by dynamic balancing of pressure —A case study of powered support longwall face. CIM Bulletin, 93 (1038). pp. 74-80. ISSN 0317-0926 CChaulya, S.K. (2000) Probabilistic Health Risk Assessment of Industrial workers Exposed to Air Pollution. Journal of Hazardous, Toxic, and Radioactive Waste, 4 (4). pp. 148-155. ISSN 2153-5493 Chaulya, S.K. and Chakraborty, M. K. and Ahmad, Mobin and Singh, K.K.K. and Singh, R.S. and Tewary, B. K. and Gupta, P.K. (2000) Water resource accounting for an iron-ore mining area in India. Environmental Geology, 39 (10). pp. 1155-1162. ISSN 0943-0105 Chaulya, S.K. and Chakraborty, M. K. and Singh, R.S. (2000) Prediction of air pollution from a proposed opencast coal mine. transactions of the Institution of Mining & Metallurgy Sec. A, Mining Industry , 109. pp. 118-124. ISSN 0371-7844 Chaulya, S.K. and Chakraborty, M. K. and Singh, R.S. (2000) Quantification of stability improvement of a dump through biological reclamation. Geotechnical and Geological Engineering , 18 (3). pp. 193-207. ISSN 0960-3182 Chaulya, S.K. and Singh, R.S. and Chakraborty, M. K. and Tewary, B. K. (2000) Bioreclamation of coal mine overburden dumps in India. Land Contamination & Reclamation, 8 (3). pp. 189-199. ISSN 0967-0513 Choudhury, Nandita and Chaudhuri, S.G. and Chatterjee, C.N. (2000) Petrographic Approach in Studying Maceral Reactivity with Special Reference to Indian Coals. MGMI Transactions, 97 (1&2). pp. 87-104. ISSN 0371-9538 DDas, T.K. (2000) Impact of Stress distribution during extration of pillars in a coal seam - a case study. Journal of Mines, Metals & Fuels, 48 (3&4). pp. 45-50. ISSN 0022-2755 Dwivedi , R. D. and Soni, A.K. and Goel, R. K. and Dube, A.K. (2000) Fracture toughness of rocks under sub-zero temperature conditions. International Journal of Rock Mechanics and Mining Sciences , 37. pp. 1267-1275. ISSN 1365-1609 GGhosh, A.K. (2000) Support design methodology for conventional single-lift bord & pillar depillaring. Minetech, 21 (2). pp. 39-47. ISSN 0970-7204 Goel, R. K. (2000) Tunnelling in Squeezing Ground Conditions. Italian Geotechnical Journal , 34 (1-2). Gupta, Asha and Kumar, Birendra (2000) Biogasification of coal using different sources of micro-organisms. Fuel, 79 (1). pp. 103-105. ISSN 0016-2361 Gupta , Asha and Kumar, Birendra (2000) Removal of iron from zircon sand using oxalic acid. Journal of Mines, Metals & Fuels, 48 (7&8). pp. 178-181. ISSN 0022-2755 JJhanwar, J.C. and Jethwa, J.L (2000) The use of air decks in production blasting in an open pit coal mine. Geotechnical and Geological Engineering , 18 (4). pp. 269-287. ISSN 0960-3182 Jhanwar, J.C. and Jethwa, J.L and Reddy, A.H (2000) Influence of Air-deck Blasting on Fragmentation in Jointed Rocks in an Openpit Manganese Mine. Engineering Geology, 57. pp. 13-29. ISSN 0013-7952 KKamavisdar, A. and Sirociya, R.S. (2000) Assessment of Sulphur Content of coal from Saoner coal miens. Indian Journal of Environmental Health , 42 (3). pp. 138-141. ISSN 0367-827 X Kashyap, S.K. and Bandopadhyay, C. (2000) In search of quality - turn to ISO-9000. Indian Mining & Engineering Journal , 39 (8). pp. 26-28. ISSN 0019-5944 MMandal, Prabhat Kumar and Maity, R. (2000) Microprocessor based real time monitoring for strata behaviour investigations in underground mines. Minetech, 21 (2). pp. 3-6. ISSN 0970-7204 Mandal, S.K and Singh, M.M. (2000) Failure Rates Vis-A-Vis Production from Longwall Faces - a case study. Coal International , 248 (2). pp. 54-56. NNabiullah,, M. and jagdish, Dr. and Pingua, B.M.P and Ahmed, Z and Dube, A.K. (2000) Study on development & laboratory evaluation of flyash based support for underground mines. Minetech, 21 (5&6). pp. 10-13. ISSN 0970-7204 PPal Roy, P. and Sawmliana, C (2000) Near-field Blast Vibration Response of Sensitive Pipelines. Journal of Explosives Engineering, 17 (6). pp. 38-44. ISSN 0889-0668 Prasad, Bably (2000) Studies of Selected coal leachates for environmentally safe disposal. Indian Journal of Environmental Protection, 20 (4). pp. 275-279. ISSN 0253-7141 Prasad, S.S. and Singh, T.N. and Singh, Prasoon Kumar (2000) The Status of Noise Pollution in Dhanbad Municipal Area. Indian Journal of Environmental Protection, 20 (1). pp. 11-14. ISSN 0253-7141 RRaina, A.K. and Chakraborty, A.K. and Ramulu, M. and Jethwa, J.L (2000) Rock mass damage from underground blasting, a literature review, and lab- and full scale tests to estimate crack depth by ultrasonic method. International Journal of Blasting and Fragmentation (Fragblast), 4. pp. 103-125. Ray , S.K. and Bhowmick, B.C. and Sahay, N. and Singh, R. P. (2000) Fighting mine fires using gases with particular reference to nitrogen. Journal of the South African Institute of Mining and Metallurgy , 100 (4). pp. 265-272. ISSN 0038-223X SSarkar, P. (2000) Dielectric behaviour of porcelain in relation to constitution. Ceramics International , 26 (8). pp. 865-875. ISSN 0272-8842 Sheorey, P. R. (2000) Design of Chain Pillars in Coal Mines. Coal Mining Technology & Management , 5 (10). pp. 2-8. Sheorey, P. R. (2000) Design of Pillars in Underground coal Mining. Coal Mining Technology & Management , 5 (7). pp. 2-10. Sheorey, P. R. (2000) Pillar Strength considering in situ Stresses. Minetech, 21 (3&4). pp. 45-49. ISSN 0970-7204 Sheorey, P. R. and John, Loui P. and Singh, K. B. and Singh, Satyendra Kumar (2000) Development of models for the Prediction of single and multi-seam subsidence. Minetech, 21 (3&4). pp. 55-63. ISSN 0970-7204 Sheorey, P. R. and John, Loui P. and Singh, K. B. and Singh, Satyendra Kumar (2000) Ground subsidence observations and a modified influence function method for complete subsidence prediction. International Journal of Rock Mechanics and Mining Sciences , 37. pp. 801-818. ISSN 1365-1609 Singh, Abhay Kumar (2000) Hydrochemistry and Quality Assessment of Groundwater in Naini Industrial Area, Allahabad District, Uttar Pradesh. Journal of Geological society of India, 55 (1). pp. 77-89. Singh, K. B. (2000) Causes and remedial measures of pot-hole subsidence due to coal mining. Journal of Scientific & Industrial Research , 59 (4). pp. 280-285. ISSN 0022-4456 Singh, K.K.K. (2000) Stabilization of old unapproachable workings of XIII seam in kari jore using ground penetrating radar. Indian Journal of Radio & Space Physics, 29. pp. 88-93. ISSN 0367-8393 Singh, Prasoon Kumar and Tewary, B. K. (2000) Environmental Legislations with respect to Mining sector in India - a Discussion. Indian Mining & Engineering Journal , 39 (4). pp. 21-24. ISSN 0019-5944 Singh, R.S. (2000) Revegetation of coal mine overburden dump (OBD) slopes by aromatic grasses. Journal of Medicinal and Aromatic Plant Sciences, 22 (1). pp. 506-509. ISSN 0253-7125 Singh, R.V.K. and Singh, V.K. (2000) Development of a mechanised spraying device for spraying fire protective coating material in the coal benches of opencast mines for preventing spontaneous combustion. Minetech, 21 (3&4). pp. 65-71. ISSN 0970-7204 Singh, R.V.K. and Singh, V.K. and Sural, G. (2000) Prevention of spontaneous heating in the highly susceptible coal bench of jhingurdah opencase project, NCL. Minetech, 21 (2). pp. 21-25. ISSN 0970-7204 Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2000) Cable bolt based mechanised depillaring of a thick coal seam. Minetech, 21 (3&4). pp. 3-9. ISSN 0970-7204 Singh, Rajendra and Mandal, Prabhat Kumar and Singh, Arun Kumar (2000) Wide stall Mining : A method to optimise coal recovery from a seam under surface features. Minetech, 21 (3&4). pp. 10-17. ISSN 0970-7204 Swarup , A. and Prasad, V. V. R. (2000) A Note on Internet for Rock Engineers. Journal of Rock Mechanics and Tunnelling Technology , 6 (1). pp. 61-63. ISSN 0971-9059 |