Article

Agrawal, Harshit and Singh, Satyendra Kumar and Mandal, P. K. and Singh, A. P. (2015) 3-Dimensional numerical modelling: an effective enabler for CM deployment in coal seams. Journal of Mines, Metals & Fuels, 63 (5&6). pp. 111-118. ISSN 0022-2755

Agrawal, Harshit and Singh, Satyendra Kumar and Singh, Awanindra P. (2016) Thick Coal Seam Mining Methods : Challenges and Opportunities. Indian Mining & Engineering Journal , 55 (3). pp. 16-21. ISSN 0019-5944

Bagchi, A. and Dutta, P.K. (1975) Limestone Quarry : Its Fragmentation Problem & Remedy. Indian Mining & Engineering Journal , 14 (5). pp. 11-18. ISSN 0019-5944

Baijal, R.N. and Chhabra, N.S. and Singh, B. (1969) Investigations into the Development of Strains in a bord and Pillar Working. Journal of Mines, Metals & Fuels, 17 (6). pp. 192-197. ISSN 0022-2755

Bandopadhyay, C. (1992) Extraction and its effect on the average stress in coal pillars. Journal of Mines, Metals & Fuels, 40 (5&6). pp. 179-182. ISSN 0022-2755

Bandopadhyay, C. and Sheorey, P. R. and Singh, B. (1988) Stability of Parting rock between level contiguous coal pillar workings. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 25 (5). pp. 307-320. ISSN 0148-9062

Das, Arka Jyoti and Mandal, Prabhat Kumar and Bhattacharjee, R. and Tiwari, S. and Kushwaha, A. and Roy, L.B. (2017) Evaluation of Stability of underground workings for exploitation of an inclined coal seam by the ubiquitous joint model. International Journal of Rock Mechanics and Mining Sciences , 93. pp. 101-114. ISSN 1365-1609

Das, M.N. and Sheorey, P. R. (1986) Triaxial Strength behaviour of some Indian coals. Journal of Mines, Metals & Fuels, 34 (3). pp. 118-122. ISSN 0022-2755

Dey, S. and Mandal, S.K. (2022) Application of MR and ANN in the prediction of the shovel cycle time, thereby improving the performance of the shovel- dumper operation - A case study. Journal of the Southern African Institute of Mining and Metallurgy, 122 (10). pp. 597-606.

Dube, A.K. and Singh, B. and Singh, Bhawani (1986) Study of squeezing pressure phenomenon in a tunnell - II. Tunnelling and Underground Space Technology, 1 (1). pp. 41-48. ISSN 0886-7798

Goel, R. K. and Jethwa, J.L and Dube, A.K. (1997) Support Pressure Assessment in Arched Underground Openings Through Poor Rock Masses. Engineering Geology, 48 (1-2). pp. 59-81. ISSN 0013-7952

Goel, R. K. and Swarup , A. and Sheorey, P. R. (2007) Bolt length requirement in underground openings. International Journal of Rock Mechanics and Mining Sciences , 44 (5). pp. 802-811. ISSN 1365-1609

John, Loui P. (1999) A Coding Error Elimination Procedure for verifying Finite Element Programs with Forced and Natural Boundary Conditions. International Journal for Numerical Methods in Engineering, 44 (9). pp. 1187-1204. ISSN 0029-5981

John, Loui P. and Rao, Karanam U.M. (2005) Heat transfer simulation in drag–pick cutting of rocks. Tunnelling and Underground Space Technology, 20 (3). pp. 263-270. ISSN 0886-7798

John, Loui Porathur and Bhattacharjee, Rana and Subashish , Tewari (2018) Numerical modeling approach for design of water-retaining dams in underground hard rock mines—a case example. Arabian Journal of Geosciences, 11. ISSN 1866-7511

Kumar, Niraj and Singh, Ajoy Kumar and Kumar, Ranjan and Sinha, A. (2018) In-Situ Stress Measurement in Raniganj Coalfield and Its Applications in Mine Stability Analysis. Indian Geotechnical Journal.

Kushwaha, A. and Banerjee, G. (2005) Exploitation of developed coal mine pillars by shortwall mining—a case example. International Journal of Rock Mechanics and Mining Sciences , 42 (1). pp. 127-136. ISSN 1365-1609

Kushwaha, A. and Murali, Mohan G. and Singh, Satyendra Kumar and Sheorey, P. R. (2003) Effect of in situ horizontal stresses on roadway stability. Journal of Mines, Metals & Fuels, 51 (3). pp. 134-142. ISSN 0022-2755

Kushwaha, A. and Singh, Satyendra Kumar and Tewari, Shubhashish (2009) Exploitation of Developed Coal mine Pillars with Double Ended Slicing and Stowing - A Case of Example. Indian Mining & Engineering Journal , 48 (4). pp. 21-26. ISSN 0019-5944

Kushwaha, A. and Singh, Satyendra Kumar and Tewari, Shubhashish and Sinha, A. (2010) Empirical approach for designing of support system in mechanized coal pillar mining. International Journal of Rock Mechanics and Mining Sciences , 47 (7). pp. 1063-1078. ISSN 1365-1609

Kushwaha, A. and Singh, T.N. (1987) Photoelasticity for mining studies. Journal of Mines, Metals & Fuels, 35 (5). pp. 171-180. ISSN 0022-2755

Kushwaha, A. and Singh, V.K. and Singh, J.K. and Singh, Raghwendra and Singh, T.N. (1993) Application of Numerical Modelling for wide stall Mining. Journal of Mining Research , 2 (1). pp. 17-26. ISSN 0971-1899

Kushwaha, A. and Bhattacharjee, Rana and Tewari, Subhashish and Mandal, Prabhat kumar (2016) Role of geological discontinuities during application of continuous miner technology in underground coal mines. Journal of Mines, Metals & Fuels, , 64 (9). pp. 395-405. ISSN 0022-2755

Kushwaha , Angad and Tewari, Subhashish and Mandal , Prabhat Kumar and Bhattacharjee, Rana and Das, Arka Jyoti and Singh, K.K.K. (2019) Stability Evaluation of Old and Unapproachable Underground Mine Workings below Surface Structures. Journal of the Geological Society of India , 93 (3). pp. 351-359. ISSN 0016-7622

Mukherjee, A.N. and Banerjee, A. and Adhikari, J.P. and Chakraborty, M.K. (1975) An Investigation into the dust problem in mica mines. Journal of Mines, Metals & Fuels, 23 (12). pp. 531-533. ISSN 0022-2755

Paul, Avinash and Murthy, V. M. S. R and Prakash, Amar and Singh, Ajoy Kumar (2024) Support design in underground coal mines using modified rock mass classification system (RMRdyn) for enhanced safety– an approach from stable and failed roof cases. Environmental Earth Sciences, 83 (103). pp. 276-285. ISSN 1866-6280

Prasad, Mohan (1995) Post-Pillar Behaviour at Deep Levels in a Copper Mine. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 32 (6). pp. 585-593. ISSN 0148-9062

Raju, N.M. and Prasad, S. and Sinha, S.P. and Venkateswarlu, V. and Singh, B. (1986) Impact of R&D on improving productivity in bord and pillar workings. Journal of Mines, Metals & Fuels, 34 (7). pp. 326-336. ISSN 0022-2755

Sheorey, P. R. (1988) Estimation of gain in pillar strength due to bolting. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 25 (5). pp. 321-326. ISSN 0148-9062

Sheorey, P. R. (1991) Experiences with application of the NGI classification to coal measures. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 28 (1). pp. 27-33. ISSN 0148-9062

Sheorey, P. R. (1985) Support Pressure Estimation in Failed Rock Conditions. Engineering Geology, 22 (2). pp. 127-140. ISSN 0013-7952

Sheorey, P. R. and Barat, D. and Mukherjee, K.P. and Prasad, R.K. and Das, M.N. and Banerjee, G. (1995) Application of the Yield Pillar Technique for Successful Depillaring Under Stiff Strata. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 32 (7). pp. 699-708. ISSN 0148-9062

Sheorey, P. R. and Biswas, A.K. (1989) An empirical failure criterion for rocks and jointed rock masses. Engineering Geology, 26 (2). pp. 141-159. ISSN 0013-7952

Sheorey, P. R. and Das, M.N. and Barat, D. and Prasad, R.K. and Singh, B. (1987) Coal pillar strength estimation from failed and stable cases. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstract , 24 (6). pp. 347-355. ISSN 0148-9062

Sheorey, P. R. and Das, M.N. and Bordia, S.K. and Singh, B. (1986) Pillar Strength Approaches based on a New Failure Criterion for coal Seams. International Journal of Mining and Geological Engineering , 4 (4). pp. 273-290.

Sheorey, P. R. and John, Loui P. and Singh, K. B. and Singh, Satyendra Kumar (2000) Ground subsidence observations and a modified influence function method for complete subsidence prediction. International Journal of Rock Mechanics and Mining Sciences , 37. pp. 801-818. ISSN 1365-1609

Sheorey, P. R. and Prasad, R.K. and Mukherjee, K.P. and Barat, D. and Das, M.N. (1994) A successful trial of the yield pillar technique in Jambad seam at porascole east colliery. Journal of Mining Research , 2 (3&4). pp. 47-50. ISSN 0971-1899

Sheorey, P. R. and Singh, B. (1970) Some Recent Pillar Design Formulae and their Applicability to Indian Coal Mines. Journal of Mines, Metals & Fuels, 18 (2). pp. 52-55. ISSN 0022-2755

Sheorey, P. R. and Verma, B.P. and Singh, B. (1973) An Analysis of the roof truss. Journal of Mines, Metals & Fuels, 21 (8). pp. 233-236. ISSN 0022-2755

Singh, A.K. and Sinha, A. (2007) In situ studies on spontaneous heating in coal pillars. Journal of Mines, Metals & Fuels, 55 (10&11). pp. 502-506. ISSN 0022-2755

Singh, Raghwendra and Singh, Satyendra Kumar and Kushwaha, A. and Sinha, A. (2012) Stability of the parting between coal pillar workings in level contiguous seams during depillaring. International Journal of Rock Mechanics and Mining Sciences , 55. pp. 1-14. ISSN 1365-1609

Singh, Satyendra Kumar and Agrawal, Harshit and Singh, A.P. (2017) Rib stability: A way forward for safe coal extraction in India. International Journal of Mining Science and Technology, 27 (6). pp. 1087-1091. ISSN 2095-2686

Singh, Satyendra Kumar and John, Loui P. and Bhattacharjee, Rana (2006) New initiatives in subsidence Engineering : Environmental Issues and Production Challenges in coal mining. Minetech, 27 (1&2). pp. 35-39. ISSN 0970-7204

Singh, Satyendra Kumar and John, Loui P. and Bhattacharjee, Rana (2006) New initiatives in subsidence Engineering : Environmental Issues and Production Challenges in coal mining. Minetech, 27 (1-2). pp. 35-39. ISSN 0970-7204

Singh, Satyendra Kumar and Kushwaha, A. and Bhattacharjee, Rana (2006) Extraction at higher depth of cover: retrospection of geotechnical problems and a recent case study. Journal of Mines, Metals & Fuels, 54 (12). pp. 322-326. ISSN 0022-2755

Singh, Satyendra Kumar and Kushwaha, A. and Singh, Raghwendra and John, Loui P. and Bhattacharjee, Rana (2003) Propositions of coal extraction below important surface or sub-surface properties with no subsidence damage - recent safety approach. Minetech, 24 (5). pp. 67-78. ISSN 0970-7204

Singh, Satyendra Kumar and Sen, Kalyan (2005) Pro-Active Role of Research in Shaping Mineral Industry into Bright Future. Minetech, 26 (3). pp. 3-8. ISSN 0970-7204

Singh, Satyendra Kumar and Sheorey, P. R. (1995) computer Application in Surveying - An Example from Subsidence. Minetech, 16 (5). pp. 31-35. ISSN 0970-7204

Singh, Satyendra Kumar and Singh, Raghavendra and Singh , A.P. and Agrawal, Harshit (2016) Closing of a running mine and suggesting a new approach of winning of otherwise-left unextracted coal reserves. Journal of Mines, Metals & Fuels, 64 (8). pp. 335-340. ISSN 0022-2755

Singh, Satyendra Kumar and Sinha, A. (2011) Analogue to design and optimize underground mining methods in some Indian coal mines. Journal of Mines, Metals & Fuels, 59 (3&4). pp. 63-67. ISSN 0022-2755

Singh, Satyendra Kumar and Sinha, A. (2006) Production challenges in underground coal mining : scenario planning and extraction strategies below surface and sub-surface properties. Journal of Mines, Metals & Fuels, 54 (8&9). pp. 198-202. ISSN 0022-2755

Singh, T.N. (1998) Needs profile of innovative equipment for bord and pillar workings. Journal of Mines, Metals & Fuels, 46 (8&9). pp. 247-252. ISSN 0022-2755

Soni, A.K. (2016) Geo-hydrological study for quantitative estimation and dewatering planning in an opencast iron ore mine of India. Journal of Mines, Metals & Fuels, 64 (9). pp. 406-413. ISSN 0022-2755

Tewari, S. and Kushwaha, A. and Bhattacharjee, R. and John, Loui P. (2018) Crown pillar design in highly dipping coal seam. International Journal of Rock Mechanics and Mining Sciences , 103. pp. 12-19. ISSN 1365-1609

Verma, Chandrani Prasad (2023) Numerical simulation study on stability analysis of crown pillar—a case study. Arabian Journal of Geosciences, 16 (12). ISSN 1866-7511

Verma , Chandrani P. (2023) Study on Critical Factors Influencing Crown Pillar’s Stability through Numerical Simulation. International Journal of Geology and Earth Sciences , 9 (2). pp. 21-27.