Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 65.

Article

Bagde, M.N. and Petros, V. (2005) Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading. International Journal of Rock Mechanics and Mining Sciences , 42 (2). pp. 237-250. ISSN 1365-1609

Bagde, M.N. and Singh, A.K. and Kumar, Niraj and Prasad, C. D. and Jha, B.K (2010) An Experience of designing supports in newly opened Belgaon Underground coal mine. Journal of Mines, Metals & Fuels, 58 (5). pp. 103-106. ISSN 0022-2755

Bharti, Abhay Kumar and Singh, Satyendra K. and Pal, Sanjit Kumar and Singh, Krishna Kant Kumar and Prakash, Amar and Bhattacharjee, Rana and Kumar, Lalan (2023) Electrical resistivity tomography technique coupled withnumerical modelling: A case study for stability analysis. Geophysical Prospecting . pp. 1-17.

Das, Arka Jyoti (2013) Determination of Status of the Opencast Mines in Kenda Area Eastern Coal Field Limited, India - Whether These are Abendoned or Disused - A Case Study. Indian Mining & Engineering Journal , 52 (12). pp. 16-26. ISSN 0019-5944

Das, Arka Jyoti and Mandal, Prabhat Kumar and Ghosh, Nilabjendu and Singh, Awanindra Pratap and Kumar, Ranjan and Tewari, Subhashish and Bhattacharjee, Rana (2023) Evaluation of energy accumulation, strain burst potential and stability of rock mass during underground extraction of a highly stressed coal seam under massive strata-a field study. Engineering Geology, 322.

Datey, U.W. (1970) Coal Loading at Faces in Indian Mines. Journal of Mines, Metals & Fuels, 18 (6). pp. 226-228. ISSN 0022-2755

Dwivedi , RD and Goel , RK and Singh , M and Viladkar , MN and Singh , PK (2019) Prediction of ground behaviour for rock tunnelling. Rock Mechanics and Rock Engineering, 52 (4). pp. 1165-1177.

Ghosh, Nilabjendu (2023) Machine learning approach for the prediction of mining-induced stress in underground mines to mitigate ground control disasters and accidents. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 9 (159).

Ghosh, Nilabjendu and Agrawal, Harshit and Singh, Satyendra Kumar and Banerjee, Gautam (2020) Optimum Chain Pillar Design at the Deepest Multi-Seam Longwall Workings in India. Mining, Metallurgy & Exploration, 37. pp. 651-664.

Ghosh, S.K. and Chakraborty, M.K. (1969) Comparison of some Soda-Lime Preparations for Suitability of use in Breathing Apparatus. Journal of Mines, Metals & Fuels, 17 (11). pp. 391-395. ISSN 0022-2755

Hazra, Bodhisatwa (2024) Study on sequence stratigraphy in the Permian sediments of terrestrial sequences within the Chintalapudi sub-basin, Godavari Coalfield, Southern India: insight from palynology and geochemistry. Environmental Earth Science, 83 (8). ISSN 1866-6280

John, Loui P. (2012) Numerical Studies on chip Formation in Drag-Pick Cutting of Rocks. Geotechnical and Geological Engineering , 30 (1). pp. 145-161. ISSN 0960-3182

John, Loui P. and Sheorey, P. R. (2002) Estimation of non-effective width for different panel shapes in room and pillar extraction. International Journal of Rock Mechanics and Mining Sciences , 39 (1). pp. 95-99. ISSN 1365-1609

Khan, Asfar Mobin and Ray, Santosh Kumar and Mohalik, Niroj Kumar and Mishra, Debashish and Mandal, Somu and Pandey, Jai Krishna (2022) Experimental and CFD Simulation Techniques for Coal Dust Explosibility: A Review. Mining, Metallurgy & Exploration volume, 39. pp. 1445-1463.

Kumar, Ashok and Singh, Arun Kumar and Kumar, Rakesh (2021) Development of empirical model for strength estimation of irregular-shaped-heightened-rib/snook for mechanised depillaring. International Journal of Rock Mechanics and Mining Sciences, 148.

Kumar, Ashok and Singh, Arun Kumar and Ram, Sahendra (2021) Parametric study to design competent irregular-shaped remnants in mechanised depillaring. Arabian Journal of Geosciences, 14. ISSN 1866-7511

Kumar, Niraj and Paul, Avinash and Singh, Ajoy Kumar (2007) Economical Aspect of Resin Bolting in Comparison to Cement Grouted Roof Bolts in Indian Coal Mines. Mining Engineers Journal , 9 (3). pp. 13-19. ISSN 0975-3001

Kumar, Niraj and Paul, Avinash and Singh, Ajoy Kumar and Sinha, A. (2011) Monitoring of Rock Movements Using Multipoint Borehole Extensometer from Surface for safety of structures above stowed goaf of an underground coal mine – a case study. Minetech. pp. 69-74. ISSN 0970-7204

Kumar, Niraj and Paul, Biswajit (2004) Planning of risk assessment and safety management in Indian surface mines. Journal of Mines, Metals & Fuels, 52 (11). pp. 314-317. ISSN 0022-2755

Kumar, Niraj and Singh, Ajoy Kumar and Rao, D.G. and Sinha, A. (2007) Techno-economic Feasibility of Resin Bolts as a System of Roof Support in a Bord-&-Pillar Development Panel - A Case Study. Indian Mining & Engineering Journal , 46 (5&6). pp. 15-22. ISSN 0019-5944

Kumar, Ranjan (2009) Multi-objective hierarchical genetic algorithms for multilevel redundancy allocation optimization. Reliability Engineering & System Safety , 94 (4). pp. 891-904.

Kumar, Ranjan (2008) Multilevel Redundancy Allocation Optimization Using Hierarchical Genetic Algorithm. IEEE TRANSACTIONS ON RELIABILITY, 57 (8). pp. 650-661.

Kumar, Ranjan (2009) Optimal multilevel redundancy allocation in series and series–parallel systems. Computers & Industrial Engineering , 57 (1). pp. 169-180.

Kumar, Ranjan and Mandal, Prabhat K and Singh, Awanindra P. and Kumar, Lalan and Singh, Satyendra K. (2019) Extraction of Deep-Seated Coal Deposits Using Emerging Underground Mining Methods. MGMI Transactions, 116. pp. 30-40.

Mandal, S.K. and Ghosh, A.k. and Oraon, S. (2018) Controlled Blasting for Deconstruction of a Railway Bridge Near Sahibganj. Journal of The Institution of Engineers (India): Series A, 99 (2). pp. 359-367. ISSN 2250-2149

Mishra, Debashish and Mohalik, N. K. and Mishra, D.P and Ray, S.K. and Pandey, J. K. (2022) Improving Workplace Environment of a Deep Underground Coal Mine with Multiseam Workings: An Alternative Approach. Mining, Metallurgy & Exploration , 39. pp. 1429-1443.

Mohan, G. Murali and Kumar, Niraj and Rao, D.G. and Sinha, A. (2007) In Situ Stresses in the Earth's Crust. Indian Mining & Engineering Journal , 46 (1). pp. 13-19. ISSN 0019-5944

Mukherjee, S.K. and Thakur, D.N. and Choudhary, S.P. and Singh, K.P. (1992) Performance of centrifugal sand pump fitted in a gravity head stowing plant. Journal of Mines, Metals & Fuels, 40 (7). pp. 194-201. ISSN 0022-2755

Murali, Mohan G. and Sheorey, P. R. and Kushwaha, A. (2001) Numerical estimation of pillar strength in coal mines. International Journal of Rock Mechanics and Mining Sciences , 38 (2). pp. 1185-1192. ISSN 1365-1609

Narayana, V.S. and Chakravorty, R.N. (1965) Booster Fans in Mines. Journal of Mines, Metals & Fuels, 13 (7). pp. 209-213. ISSN 0022-2755

Paul, Avinash and Kumar, Niraj and Singh, Ajoy Kumar (2018) Design of Support System and Stability Evaluation for Underground Workings of Gare Palma Coal Mine – A Case Study. AMSE JOURNALS, 78 (3). pp. 303-315.

Paul, Avinash and Murthy, VMSR and Prakash , Amar and Singh, Ajoy Kumar (2020) Prediction of rock load emphasizing excavation damage of in situ rockscaused by blasting in coal mines. Current Science, 118 (1). pp. 123-132.

Paul, Avinash and Prakash, Amar and Kumar, Niraj and Kumar, Pramod and Singh, Ashok Kumar (2022) Integration of Numerical and Empirical Approaches for Assessment of Apt Support Design for Various Underground Openings of Chromite Mine. Journal of the Geological Society of India , 98. pp. 851-858. ISSN 0016-7622

Paul, Avinash and Prakash, Amar and Singh , Ajoy Kumar and Murthy, V M S R (2020) Estimation of rock load for junctions based on roof failure cases for safe mining operation. Arabian Journal of Geosciences volume, 13 (1069).

Paul, Avinash and Singh, A.P. and John, Loui P. and Singh, Ajoy Kumar (2011) Validation of RMR-based support design using roof bolts by numerical modeling for underground coal mine of monnet ispat, raigarh, India - a case study. Arabian Journal of Geosciences. ISSN 1866-7511

Paul, Avinash and Singh, Ajoy Kumar (2014) Rock Load Estimation in Development Galleries and Junctions for Underground Coal Mines: A CMRI-ISM Rock Mass Rating Approach. Journal of Mining , 2014. pp. 1-9.

Paul, Avinash and Singh, Ajoy Kumar (2013) Statistical Analysis of CMRI-RMR and Q-system for implementation in depillaring panels of Indian Coal Mines. International Journal of Scientific Engineering and Technology, 2 (10). pp. 947-952. ISSN 2277-1581

Paul, Avinash and Singh, Ajoy Kumar and Kumar, Niraj (2009) Empirical approach for estimation of rock load in development workings of room and pillar mining. Journal of Scientific & Industrial Research , 68 (3). pp. 214-216. ISSN 0022-4456

Paul, Avinash and Singh, Ajoy Kumar and Kumar, Niraj and Rao, D.G. and Sinha, A. (2006) Instrumentation as first line of defense for prediction of rock movement in power house drift - a case study. Mining Engineers Journal, 7 (12). pp. 12-19.

Paul, Avinash and Singh, Ajoy Kumar and Rao, D.G. and Sinha, A. (2004) Resin bolting as a system of support in underground coal mines. Mining Engineers Journal , 6 (4). pp. 14-22. ISSN 0975-3001

Paul, Avinash and Singh, Ajoy Kumar and Rao, D.G. and Sinha, A. (2005) Role of Rock properties in various failure criteria. Indian Mining & Engineering Journal , 44 (6). pp. 13-19. ISSN 0019-5944

Paul, Avinash and Kumar, Niraj and Kumar, Pramod and Singh , Ashok Kumar (2020) Application of CMRI-ISM RMR for Stability Analysis of Development Workings for Ballarpur Underground Coal Mine — An Empirical and Numerical Approach. Journal of the Geological Society of India , 96. pp. 163-170. ISSN 0016-7622

Rai, Sneha and Prakash, A. and Ghosh, A.K. (2012) The evaluation of coal seam, based on borehole data in Karharbari formation, Giridih basin, jharkhand. Journal of Mines, Metals & Fuels, 60 (7&8). pp. 146-150. ISSN 0022-2755

Raina, A.K. and Chakraborty, A.K. and Choudhury , P.B. and Ramulu, , M. and Udpikar , V. and Sinha, A. (2009) Fragalyst 3.0: An indigenous fragmentation assessment tool based on digital image analysis – application and analysis. Journal of Mines, Metals & Fuels, , 57 (3&4). pp. 83-88. ISSN 0022-2755

Ram, Sahendra and Singh, Arun Kumar and Kumar, Rakesh and Kumar, Ashok and Kumar, Niraj and Raja , Mudassar (2021) Design of rock bolt-based goaf edge support for conventional depillaring with stowing. Arabian Journal of Geosciences. ISSN 1866-7511

Saikia, Kalyan (2006) Geostatistical modelling of mica peridotite intrusive affected coal in seams of putki ballihary area, jharia coalfield vis-a-vis possible resource utilization in cement industry. Journal of Mines, Metals & Fuels, 54 (1&2). pp. 16-21. ISSN 0022-2755

Saikia, Kalyan (2004) Role of geostatistics in surface mine planning. Journal of Mines, Metals & Fuels, 52 (11). pp. 251-256. ISSN 0022-2755

Sharma, Sadanand and Arora, Charu and Sahua, Deepti and Bharti, Dipti and Tamrakar, Vinita and Sonia, Sanju (2019) Adsorption of hazardous dye crystal violet from industrial waste using low-cost adsorbent Chenopodium album. Desalination and Water Treatment, 167. pp. 324-332.

Sharma,, Pushpendra and Kumar, Ashok and Shams, Noorullah and Verma, Amit Kumar and Kumar, Dheeraj and Singh, Arun Kumar and Ram , Sahendra (2021) Parametric stability analysis for optimum size of rib/snook in mechanized depillaring. Arabian Journal of Geosciences, 14 (4). ISSN 1866-7511

Sheorey, P. R. (2000) Pillar Strength considering in situ Stresses. Minetech, 21 (3&4). pp. 45-49. ISSN 0970-7204

Sheorey, P. R. and Murali, Mohan G. and Sinha, A. (2001) Influence of elastic constants on the horizontal in situ stress. International Journal of Rock Mechanics and Mining Sciences , 38 (2). pp. 1211-1216. ISSN 1365-1609

Singh, Ajoy Kumar and Paul, Avinash (2013) Variation of RMR for different rock types as immediate roof in Jharia Coalfield of India. International Journal of Software & Hardware Research in Engineering, 1 (1). pp. 44-55. ISSN 2347-4890

Singh, Ajoy Kumar and Paul, Avinash and Kumar, Niraj and Rao, D.G. and Sinha, A. (2006) Framing of design of support for lip and drift of a new underground coal mine - a case study. Journal of Mines, Metals & Fuels, 54 (10&11). pp. 203-205. ISSN 0022-2755

Singh, Ajoy Kumar and Sinha, A. and Paul, Avinash (2005) Geotechnical investigation for support design in depillaring panels in Indian coalmines. Journal of Scientific & Industrial Research , 64 (5). pp. 358-363. ISSN 0022-4456

Singh, Arun Kumar and Kumar, Ashok and Singh, Rajendra and Ram, Sahendra and Kumar, Rakesh and Singh, Amit Kumar (2021) Field and simulation studies for mechanised depillaring below incompetent geological formations of an Indian coalmine. Journal of The Geological Society of India, 97 (4). pp. 405-415.

Singh, Arun Kumar and Kumar, Ashok and Singh, Rajendra and Ram, Sahendra and Kumar, Rakesh and Singh , Amit Kumar (2020) Coal Pillar Extraction Under Weak Roof. Mining, Metallurgy & Exploration, 37. pp. 1451-1459.

Singh, Neelratan (2022) Heavy metal pollution in groundwater of urban Delhi environs: Pollution indices and health risk assessment. Urban Climate, 45.

Singh, Neelratan (2022) Morphometric Analysis of Baner, Neogal and Awa River Basins, Himachal Pradesh, India. Journal of the Geological Society of India , 98. pp. 125-132. ISSN 0016-7622

Singh, Neelratan (2022) Study of Micro-structures and their Relation with Occurrence of Mineral Matter in Ramagundam Coals, Godavari Basin, India: Implications on Coal and Hydrocarbon Industries. Journal of the Geological Society of India , 98. pp. 88-92.

Singh, R.P. and Mallick, Mousumi and Verma, M.K. (2015) Studies on temperature distribution and its effect on ventilation system during open fire in a mine gallery - a model study. Journal of Mines, Metals & Fuels, 63 (3). pp. 57-63. ISSN 0022-2755

Sinha, J.K. and Chaira, B.B. and Bose, J.M. and Nair, P.K. and Das, B.N. and Rashidi, N.A. and Verma, B.K. (1985) Dust Emission from Lead Smelter. Indian Journal of Environmental Protection, 5 (3). pp. 181-185. ISSN 0253-7141

Sinha, Sanjiv and Srivastava, S.C. (1992) Catalytic bead-type methane sensor for mine atmosphere. Research and Industry , 37 (1). pp. 7-10. ISSN 0034-513 X

Soni, A.K. (2020) Estimation of Mine Water Quantity: Development of Guidelines for Indian Mines. Mine Water and the Environment, 39 (2). pp. 397-406. ISSN 1616-1068

Venkateswarlu, V. and Sinha, A. and Raju, N.M. (1983) Prediction of roof conditions through geotechnical studies - an approach. Journal of Mines, Metals & Fuels, 31 (3). pp. 94-100. ISSN 0022-2755

Book Section

Paul , Avinash and Kumar, Niraj and Kumar, Pramod and Singh, Ashok Kumar (2022) Appropriate Support Design for Incline Lip Opening and Drivages in Fragile Rock Mass Formation: An Empirical and Numerical Based Case Study. In: Proceedings of Geotechnical Challenges in Mining, Tunneling and Underground Infrastructures. Springer, Singapore, pp. 117-132. ISBN 978-981-16- 9770-8

This list was generated on Fri Nov 8 06:11:29 2024 IST.