Prakash, A. and Singh, K.B. (2020) A methodology for designing cutting drum of surface miner to achieve production of desired chip size. Sādhanā, 45 (1). ISSN 0256-2499

Full text not available from this repository.

Abstract

The size of coal chips, produced during coal cutting operations, is of prime importance from the viewpoint of feed size desired by power plants. Proper chip size in cutting can eliminate primary crushing and in-turn save energy. Achieving a designated size of chip is intimately linked with the drum design inter alia the wrap angle, line spacing of picks and pick size. Operating parameters namely cutting speed and drum speed also influence the output. Considering the increased need to produce a sized product for cost-effective mining, a design methodology was developed to achieve a required chip size for surface miners with a middle drum configuration. Various pick, drum and operational parameters were taken into account for the development of drum design, namely drum width, drum diameter, pick size, clearance angle, rake angle, cutting angle, lacing pattern, angle of wrap, depth of cut, indented depth of cut and pick spacing. Limiting factors for drum design such as the number of picks, pick temperature, strength of pick, depth of cut and dust generation were discussed. A new drum configuration for achieving 100 mm chip size was validated which showed close agreement with the output produced using 2200SM model surface miner.

Item Type:	Article
Uncontrolled Keywords:	Chip size; depth of cut; drum; pick; surface miner
Subjects:	Mine Subsidence
Divisions:	UNSPECIFIED
Depositing User:	Mr. B. R. Panduranga
Date Deposited:	09 Jun 2020 05:01
Last Modified:	09 Jun 2020 05:01
URI:	http://cimfr.csircentral.net/id/eprint/2213

Actions (login required)

View Item