Ray , S.K. (2002) Productivity optimisation in weak sedimentary formations for improved coal production and roof stability-an approach. Geotechnical and Geological Engineering , 20 (3). pp. 273-290. ISSN 0960-3182

PDF Restricted to Registered users only Download (193Kb) | Request a copy

Abstract

Far-field peak particle velocity (PPV) measurements were made in the roof while blasting in coal development drivages at Tandsi Mine, Western Coalfields Limited, India. The roof was fragile at this mine and was posing constant support problems for mining, resulting in low productivity. The PPV measurements have been used to decipher the damage zone in the roof. The extent of damage obtained has been compared to establish the threshold limits for the damage zone. Conversely, the maximum charge perdelay that can be exploded is calculated and a suitable blast design has been recommended for maintaining the roof stability and pull. A roof vibration predictor equation has been developed that shows a consistent trend indicating that it may have future use in a similar geo-mining setup. The blast pattern recommended has reduced the damage extent, though marginally, but helped in improving pull. Critical PPV for incipient rock damage in underground coal mine development drivages under fragile roof were computed. The PPV level for incipient crack growth was found to vary from 500 to 800 mm/s while for overbreak it varied from 800 to 1200 mm/s. It was also observed that the location of cut holes, charge concentration and firing sequence were found to be responsible for the difference in their damage potential.

Item Type:	Article
Uncontrolled Keywords:	blasting, mine roof, peak particle velocity, rock damage.
Subjects:	Mines Systems Engineering
Divisions:	UNSPECIFIED
Depositing User:	Dr. Satyendra Kumar Singh
Date Deposited:	26 Nov 2011 08:58
Last Modified:	26 Nov 2011 08:58
URI:	http://cimfr.csircentral.net/id/eprint/145

Actions (login required)

View Item