Singh, Rakesh Kumar and Kumar, Manish and Singh, V.K. (2012) Dump design and remedial measure for stabilisation. Bhartiya Vaigyanic Evam Audhyogik Anusandhan Patrika (Hindi) , 20 (2). pp. 251-256. ISSN 0971-7706

Full text not available from this repository. (Request a copy)

Abstract

The paper deals with the geotechnical studies carried out for slope design of the dump slopes at chromite ore open cast mine, Orissa, M/s IMFA. The geotechnical properties of the dump materials were tested at the Rock & Soil Mechanics Laboratory of CSIR – CIMFR. The ground water condition was estimated. The slope stability analysis was done for optimum dump design. It was also aimed to know the influence of slope design parameters on the safety factor by sensitivity analysis, which tells the importance of the parameter for stability of the slope. A more justified and suitable remedial measure can be planned for any critical slope after sensitivity analysis. The most likely geo-mining condition of the dump was adjudged to be in drained condition because proper drainage has been provided at top and toe of the dump. The 75m high dump of limonite should be developed in four stages/ lifts. The height of lower three lifts should be 20 m each and the top lift should be 15 m high. The expose width of berm should be equal to vertical height of lift. The sensitivity analysis shows that the influence of wateris alarming, hence every attempt is being taken to keep the rain water away from the slope and proper drainage pattern is effectively maintained.

Item Type: Article
Subjects: Slope Stability
Divisions: UNSPECIFIED
Depositing User: Dr. Satyendra Kumar Singh
Date Deposited: 23 Aug 2013 12:44
Last Modified: 23 Aug 2013 12:44
URI: http://cimfr.csircentral.net/id/eprint/1414

Actions (login required)

View Item View Item