Bhagat, Narayan K and Singh, M.M. and Rana, Aditya and Singh, P.K. (2020) Directional controlled blasting technique for excavation of unstable slopes along the Konkan Railway route. Mining Engineering Journal. , 37. pp. 833-850.

Mandal, S.K and Bhagat, N.K. and Singh, M.M. (2014) Magnitude of vibration triggering component determines safety of structures. Journal of Mining and Environment, 5 (1). pp. 35-46. ISSN 2251-8592

Mandal, S.K and Bhagat, N.K. and Singh, M.M. (2013) Particle Velocity of Ground Vibration Reflects Mechanism of Rock Breakage and Damage to Structures. Journal of Civil Engineering and Science, 2 (3). pp. 178-183. ISSN 2227-4634

Mandal, S.K and Singh, M.M. and Bhagat, N.K. (2012) Simultaneous initiation of cut and production holes in trench method of blasting. International Journal of Mining and Mineral Engineering, 4 (2). pp. 139-150. ISSN 1754-890X

Singh, M.M. and Bhagat, N.K. (2011) Recent developments in designing of burn-cut method of blasting in tunnelling for higher productivity and special emphasis on the preventation of overbreaks. Journal of Mines, Metals & Fuels, 59 (10). pp. 332-339. ISSN 0022-2755

Mandal, S.K and Singh, M.M. and Dasgupta, S. (2010) Theoretical evaluation of energy from blast-induced vibration waves measured on ground and structure. Journal of Mines, Metals & Fuels, 58 (7). pp. 180-193. ISSN 0022-2755

Mandal, S.K and Singh, M.M. (2009) Mathematical model to understand impact of velocity of detonation on vibration magnitude. Journal of Mines, Metals & Fuels, 57 (7). pp. 178-182. ISSN 0022-2755

Mandal, S.K and Singh, M.M. (2009) Evaluating extent and causes of overbreak in tunnels. Tunnelling and Underground Space Technology, 24 (1). pp. 22-36. ISSN 0886-7798

Singh, K.K.K. and Singh, Amarjeet K. and Singh, M.M. (2008) Delineation of hard subsurface strata of a limestone mine using 2D resistivity. The Leading Edge , 27 (9). pp. 1096-1097. ISSN 1070-485X

Mandal, S.K and Singh, M.M. and Bhagat, N.K. (2008) Impact of single - hole and multi-hole blasting on vibration parameters. Journal of Mines, Metals & Fuels, 56 (7&8). pp. 122-128. ISSN 0022-2755

Mandal, S.K and Singh, M.M. (2008) Analysis of Blast Pattern to Evaluate Extent and Causes of Overbreak in Large Cavern. Blasting and Fragmentation , 2 (1). pp. 1-26. ISSN 1937-6359

Mandal, S.K and Singh, M.M. and Dasgupta, S. (2008) Theoretical Concept to Understand Plan and Design Smooth Blasting Pattern. Geotechnical and Geological Engineering , 26 (4). pp. 399-416. ISSN 0960-3182

Singh, M.M. and Mandal, S.K (2007) Mechanics of rock breakage by blasting and its application in blasting design. Journal of Mines, Metals & Fuels, 55 (6&7). pp. 183-189. ISSN 0022-2755

Mandal, S.K and Singh, M.M. and Bhagat, N.K. (2007) Model for energy-based evaluation of blast waves to assess safety of structures. International Journal of Mining, Reclamation and Environment, 21 (2). pp. 111-125. ISSN 1748-0930

Mandal, S.K and Singh, M.M. (2007) Air overpressure and noise vis-a-vis detonating fuse. CIM Bulletin, 100 (1101). pp. 1-6. ISSN 0317-0926

Mandal, S.K and Singh, M.M. (2007) Two-dimensional theoretical model for design of burn-cut pattern. transactions of the Institution of Mining & Metallurgy Sec. A, Mining Technology, 116 (1). pp. 32-39. ISSN 0371-7844

Mandal, S.K and Singh, M.M. and Bhagat, N.K. (2006) Magnitude of Vibration vis-a-vis Charge per Delay and Total Charge. Journal of the Institution of Engineers (India), 86. pp. 32-38. ISSN 0257-442X

Mandal, S.K and Singh, M.M. (2005) A theoretical concept of structural dynamics to evaluate blast - induced damage on structures. transactions of the Institution of Mining & Metallurgy Sec. A, Mining Technology, 114 (4). pp. 219-226. ISSN 0371-7844

Mandal, S.K and Singh, M.M. (2005) Deflection of walls as the cause of structural damage - a conceptual model. Journal of Mines, Metals & Fuels, 53 (3&4). pp. 55-61. ISSN 0022-2755

Pal Roy, P. and Singh, M.M. and Mandal, S.K (2002) A note on the usage of sawdust in ANFO for optimal blasting in limestone mines at a reduced cost. Journal of Mines, Metals & Fuels, 50 (3). pp. 51-53. ISSN 0022-2755

Pal Roy, P. and Singh, M.M. and Mandal, S.K (2002) Economic Method of Conducting Optimum Blasts in Limestone Mines. SME Transactions , 312.

Mandal, S.K and Singh, M.M. and Singh, R.B. (2001) Segregation of coal by single-shot blasting of composite strata in opencast mines. Institution of Mining & Metallurgy Sec. A, Mining Technology , 110. pp. 69-72. ISSN 0371-7844

Mandal, S.K and Singh, M.M. (2000) Failure Rates Vis-A-Vis Production from Longwall Faces - a case study. Coal International , 248 (2). pp. 54-56.

Singh, P.K. and Singh, M.M. and Singh, R.B. (1997) Response of Surface Structures to Rock Blasting. Mineral Resource Engineering , 6 (4). pp. 185-194. ISSN 0950-6098

Singh, M.M. and Singh, R.B. and Pal Roy, P. and Bagchi, A. and Dhar, B.B. (1994) An approach to improve blasting efficiency in an iron ore mine. International Journal of Surface Mining, Reclamation and Environment, 8 (3). pp. 87-93. ISSN 1389-5265

Prakash, A.J. and Bagchi, A. and Barman, B.K. and Singh, R.B. and Pal Roy, P. and Singh, M.M. and Singh, B. (1991) Structural damage due to blasting in opencast coal mines. Journal of Mines, Metals & Fuels, 79 (4). pp. 79-86. ISSN 0022-2755

Singh, M.M. and Singh, R.B. (1991) Blast design to improve fragmentation in a mismatched combination of drill diameter and depth in bedded rock. Mining Science and Technology, 12 (2). pp. 179-186. ISSN 1674-5264

Adhikari, G.R. and Singh, M.M. (1989) Influence of rock properties on blast-induced vibration. Mining Science and Technology, 8 (3). pp. 297-300. ISSN 1674-5264

Gupta, R.N. and Singh, M.M. and Singh, R.S. (1986) An approach to the design of optimum production blast pattern from single hole blast results. Journal of Mines, Metals & Fuels, 34 (11). pp. 506-510. ISSN 0022-2755