Bagde, M.N. (2011) The Effect of Micro-Structure on Fatigue Behavior of Intact Sandstone. International Journal of Geosciences , 2 (3). pp. 240-247. ISSN 2156-8359

[img] PDF
Restricted to Registered users only

Download (1007Kb) | Request a copy


With advent of servo-controlled stiff testing machines, it is now possible to conduct tests on a rock in the laboratory under different variable controlled conditions. In this paper, cyclic fatigue behaviour of intact sandstone obtained from the rock burst prone coal mine in the Czech Republic were presented. Tests were conducted on MTS- 816 rock test system in the laboratory on intact rock samples of L/D ratio 2 under cyclic loading frequency of 0.1, 1, 3, 5, 7 and 10 Hz at amplitude of 0.1 mm under displacement control mode until failure of the samples in uni-axial compression. From, the primary results it was observed that at low loading frequency range of 0.1 to 3 Hz, there was degradation of the rock samples in terms of fatigue strength and modulus. While, at higher frequency rose-up in strength and deformation properties were observed. It was observed that the machine behaviour in terms of amplitude at higher loading frequencies might be affecting the results. It seemed that machine behaviour of servo-hydraulic testing system was also dependent on rock type under investigation.

Item Type: Article
Uncontrolled Keywords: Cyclic Loading, Fatigue, Micro-Structure, Machine Behaviour, Rock Memory
Subjects: Calibration Cell
Depositing User: Mr. B. R. Panduranga
Date Deposited: 16 May 2016 08:49
Last Modified: 16 May 2016 08:49

Actions (login required)

View Item View Item